Bem-vindo à interface do Mixxx. Aqui é onde a mágica acontece. Se vai querer ficar bem familiar com essa interface porque é o principal caminho de usar o Mixxx. Nesse capítulo, nós te apresentamos a interface padrão do Mixxx e descrevemos os seus elementos, botões e deslizantes.
This is the LateNight skin, PaleMoon color theme. It is the default skin supplied with Mixxx 2.3. There
are a variety of other skins included with Mixxx. You should explore them all
to figure out which one you prefer. This section will focus on LateNight only, though all Mixxx skins provide most of the controls described here.
Click the SETTINGS button or gear icon (depending on the skin) to open the skin settings menu. This provides common basic controls as well as some skin-specific options.
The deck section comes in three sizes: Full, Compact and Mini.
You can switch between any of the three sizes by clicking on the Settings button or the gear icon. Under the Decks section, click on «hide mixer to select».
This will automatically select the Compact deck (underlined and bolded). If you wish to change to a different deck size, you can choose FULL or Mini.
The Compact deck has a reduced set of controls for when you don’t need all of them on screen, for example when they’re also accessible from your controller. Reverse is removed from the Playback/Cue Controls, and the Controles de Hotcue, Intro/Outro Markers, Controles de Loop and rate adjust buttons are not shown.
The mini deck is of a much smaller size and shows only the waveform and the Mostrador de Informações da Faixa. You can also use minimal decks with the maximized library.
Dica
Hiding the mixer will by default switch to the compact decks.
A seção do deck permite que você controle tudo que é relacionada ao toca-discos virtual deck. Nós vamos quebrar isso em seções.
The title of the track that was loaded into a deck is displayed on top. This
is the same as the title listed under the Title column heading in the Mixxx library. This information is initially loaded from the track’s
metadata. If the metadata is missing, the title and artist are guessed
from the filename.
Artista da Faixa
The artist of the track is listed below. It is the same as listed under the
Artist column heading in the Mixxx library.
Dica
Double-click any track text label to open the Properties editor
where you can edit all track metadata.
Time Elapsed/Remaining/Both
By default it displays the total elapsed time in the track up to the
millisecond. Clicking on the display switches to the Time Remaining view,
which indicates how much time is left before the track reaches the end.
Clicking the display again, both the elapsed and remaining time are shown
simultaneously in the format elapsed time / remaining time.
You can change the default in Preferences ‣ Decks ‣ Deck options.
BPM (Tempo)
O número no topo direito é o BPM efetivo da faixa. Esse é o BPM detectado da faixa, ajustado para a velocidade de reprodução da faixa. Por exemplo, se a faixa é normalmente 100 BPM, e ela está tocando em +5%, então o BPM efetivo vai ser 105 BPM.
Dica
You can use a keyboard shortcut and tap with the beat to set the BPM
to the speed you are tapping, go to Usando um Teclado for more
information.
The key displays the current musical key of the loaded track after pitch shifting. The key is displayed below the BPM (Tempo). This is the same as the key that is shown under the Key column heading in the Mixxx library.
Clicking the key will expand it to reveal more options:
Pitch Control: This changes the track pitch independent of the tempo. Left-clicking the - button decreases the pitch by one semitone. Right-clicking it decreases the pitch by 10 cents. Left-clicking the + button increases the pitch by one semitone. Right-clicking it increases the pitch by 10 cents.
Sync and Reset Key: Left-clicking the MATCH button sets the key to a pitch that allows harmonic transition from the other track. It requires a detected key on both involved decks. Right-clicking it resets the key to the original track key.
Cover Art
The cover art of the track loaded into the deck is displayed on the left side of the track. This is the same as the cover art that is shown under the Cover Art column heading in the Mixxx library.
In Deere skin you can choose to enable or disable the cover art by clicking the gear icon in the upper right corner, then toggling the Decks ‣ Cover Art option. Clicking on the cover art will expand it into a full blown image.
The cover art is also shown in the Vinyl Widget next to the parallel waveforms.
A seção das ondas do deck permite que você visualize as mudanças de áudio que ocorre pela faixa, você basicamente “vê” a sua música.
By default the waveform displays are aligned parallel to each other in
order to make beatmatching easier, as it is possible to beatmatch
visually by aligning the beats that appear in each waveform.
Parallel waveforms in the default Mixxx skin (LateNight, PaleMoon theme)
Depending on the skin, Mixxx displays either parallel waveforms (default) or
separate waveforms. LateNight and Tango skins only have resizable parallel waveforms while
Shade skin provides only separate waveforms.
In Deere skin you can select your preferred appearance by clicking the gear icon in the upper right corner,
then toggling the Skin Settings ‣ Parallel Waveforms option.
Aviso
If you have a slower computer and notice performance issues with
Mixxx, try lowering the frame rate or changing the waveform type
in Preferences ‣ Waveforms.
Resumo das Ondas
O grande resumo das ondas mostra as ondas da faixa perto de onde a faixa está tocando e é atualizada em tempo real. O mouse pode ser usado nas ondas para pausar, fazer scratch, ir para trás ou para jogar as faixas. Ao clicar com o botão direito nas ondas você pode arrastar o mouse para fazer ajustes de pitch temporários.
Dica
You can select from different types of displays for the waveform,
which differ primarily in the level of detail shown in the
waveform, in Preferences ‣ Waveforms ‣ Waveform type.
Right next to the waveform view there are controls to adjust the beatgrid.
You may stretch, compress or shift the beatgrid in case it was not detected
correctly (see Beat Detection). There are also controls to shift
cue points in case they are set off after decoder changes, for example when you migrated
your Mixxx library to another compouter or operating system. These controls are
hidden by default and need to be enabled in the skin settings menu.
Beatgrid editing controls in the default Mixxx skin (LateNight, PaleMoon theme)
In Deere skin, these controls are located in the expandable BPM section inside
the decks.
Visão Geral das Ondas
The smaller, zoomed-out version of the waveform shows the various markers
within the track as well as the waveform envelope of the entire track. This is
useful because they allow DJs to see breakdowns far in advance. As visual aid,
the part of the track that has already been played is darkened.
Clicking somewhere on the waveform allows you to jump to an arbitrary position
in the track. Like with the Waveform summary, you can select from different
types of displays for the overview in
Preferences ‣ Waveforms ‣ Overview type.
Janela do Vinil
A linha na janela do vinil roda se a faixa se mover. Ela é similar ao marcador de posição encontrado nos vinils de stratch. Use o mouse na janela do vinil para pausar, fazer stratch, rodar para trás ou jogar faixas - como em um disco real. Quando você fizer Loops temporários ou clicar com o lado direito no vinil enquanto a música toca, um marcador fantasma mostra onde a reprodução vai continuar. A Janela do Vinil é escondida por padrão e pode ser ativado no Grade de Botões de Opções do Deck.
If vinyl control is enabled, it can optionally display the time-coded
vinyl signal quality. Activate the option in Preferences ‣
Vinyl Control ‣ Show Signal Quality in Skin.
Aproximação das Ondas
Using the mouse-wheel everywhere in the waveform summary will zoom the
waveform in or out. You can choose whether to synchronize the zoom level
between the decks in Preferences ‣ Waveforms.
Marcadores nas Ondas
Enquanto mixando, vários marcadores adicionais podem aparecer nas ondas:
Position marker: The static vertical line in the center of the waveform
summary indicates the playback point of the deck. The waveform overview
includes a vertical line to show the current position within the track.
Marcador de Batidas: As linhas regulares brancas na visão geral das ondas mostra a localização das batidas no áudio, também chamado de grade de batidas.
The six buttons at the bottom right below the waveform allow you to configure
the deck. Starting from the top row (left to right) and the bottom row (left to right), the buttons are as
follows:
Slip Mode Toggle
When active, the playback continues muted in the background during a loop, reverse, scratch, etc.
Once disabled, the audible playback will resume where the track would have been.
Ligar/Desligar Modo de Quantização
Se ativado, todos os cues, hotcues, loops, e loops de batida vão ser automaticamente quantizados para que eles começem sempre em uma batida.
Botão de Ajuste da Grade de Batidas
Clicking this button adjusts the track beat-grid so that the current position
is marked as a beat. This is useful if Mixxx was able to accurately detect the
track’s BPM but failed to align the beat markers on the beats. For
more information, go to the chapter Beat Detection.
Botão Ejetar Faixa
Clicking this button ejects the track from the deck. If no track is loaded the
last-ejected track (of any deck) is reloaded.
Double-click to reload the last
replaced track. In empty decks the second-last ejected track is reloaded.
Alternatively you can use a keyboard shortcut, go to the chapter
Usando um Teclado for more information.
Ligar/Desligar o Modo de Repetição
Se ativado, o modo de repetição vai pular para o começo e continuar tocando quando a faixa terminar.
Ligar/Desligar Trava de Tom
Key lock locks the track’s pitch so that adjustments to its
tempo via the rate slider do not affect its pitch. This is useful if you would
like to speed up or slow down a track and avoid the “chipmunk” effect that
speeding up vocals has.
Clicar no botão Tocar/Pausar começa e pausa a reprodução
Veja também
O comportamento real do botão Tocar/Pausar depende do modo de Cue selecionado.
Cue Button
Se o botão é pressionado enquanto a faixa estiver tocando, a posição de reprodução pula para o ponto Cue da faixa e a faixa é pausada. Se a faixa estiver pausada no ponto Cue, você pode pré-escutar ao segurar o Botão Cue. Se você não moveu o seu ponto Cue, o ponto padrão é no começo da faixa.
Veja também
O comportamento real do botão Cue depende do modo de Cue selecionado.
Botão Inverter
Press and hold this button to temporarily play the track backwards during regular playback.
Right-click and hold for “Censor” mode. This reverses the track while the playback continues
muted in the background. On release playback is resumed where the track would have been
if it had not been reversed.
Mixxx supports various Cue modes that adapt to fit other devices in your setup
or your personal preferences. The actual behavior of the Play, Pause, and Cue
buttons depends on the selected Cue mode. To change the Cue mode, go to
Preferences ‣ Decks ‣ Cue mode.
Modo Mixxx (padrão)
Enquanto pausado no ponto Cue (Botão Cue aceso):
Hold down the Cue button to play the track from the Cue point,
as long as the button is pressed. After releasing the Cue button, the track
jumps back to the Cue point and pauses again.
Press Play/Pause before releasing the Cue button to continue playback normally.
Enquanto pausado fora do ponto Cue (Botão Cue piscando):
Tap the Cue button to store the current position as new Cue point.
Enquanto tocando:
Tap the Cue button to jump to the Cue point and pause playback.
Mixxx mode (no blinking)
Same as the default Mixxx mode, but without blinking indicators.
Modo Pioneer
Same as Mixxx mode, but the buttons are more flashy matching a Pioneer CDJ player.
O botão Tocar/Pausar pisca uma vez por segundo quando a faixa é pausada.
The Cue button flashes twice a second when the next push will move the Cue point.
Modo Denon
While paused at Cue point (Cue button lit) - same as Mixxx mode:
Hold down the Cue button to play the track from the Cue point,
as long as the button is pressed. After releasing the Cue button, the track
jumps back to the Cue point and pauses again.
Press Play/Pause before releasing the Cue button to continue playback normally.
Enquanto pausado fora do ponto Cue (Botão tocar piscando):
Tap the Cue button to move the track back to Cue point.
Tap the Play/Pause button to move the Cue point to the current
position and start playback.
While playing - same as Mixxx mode:
Tap the Cue button to jump to the Cue point and pause playback.
Modo Numark
Same as Denon mode, but without a flashing Play/Pause button.
Esse modo é útil se você quiser implementar uma skin customizada com decks de 3 botões, com um botão Cuue, um botão de Pausa dedicado, e um botão Tocar/Stutter.
CUP (Cue + Play) mode
Press the Cue button to jump to the Cue point and pause,
continuing playback only when either the Cue button is released or Play/Pause
is pressed.
If the Cue button is pressed while paused, the Cue point is
first moved to the current position.
You can use the Intro/Outro Markers with Auto DJ to mix in and out of points but unlike hotcues, they do not mark only one point.
The intro and outro are sections and each section is defined by two points. See Auto DJ - Automatize a sua mixagem.
Intro Start/End Markers
The analyzer places the intro start point at the first sound of a track and you can decide where to place the intro end point.
Left-clicking on the marker when it is set jumps to the marker. When it is not set, clicking sets the marker to the current play position.
Right-clicking on the marker when it is set clears the marker.
Outro Start/End Markers
The analyzer places the outro end point at the last sound of a track and you can decide where to place the outro start point.
Left-clicking on the marker when it is set jumps to the marker. When it is not set, clicking sets the marker to the current play position.
Right-clicking on the marker when it is set clears the marker.
Nota
If quantization is enabled, left-clicking on any of the markers snaps to the nearest beat.
You can type, use the arrow keys or scroll vertically in the input box to select the number of beats to jump or move, with the Beatjump Forward/ Backward buttons.
Beatjump Backward button
Clicking this while the loop is inactive will make the track jump backward by the set number of beats (left click) or by one beat (right click).
Clicking this while the loop is active will move the loop backward by the set number of beats (left click) or by one beat (right click).
Beatjump Forward button
Clicking this while the loop is inactive will make the track jump forward by the set number of beats (left click) or by one beat (right click).
Clicking this while the loop is active will move the loop forward by the set number of beats (left click) or by one beat (right click).
O Modo de Controle por Vinil e controles de Cueing de um deck.
The control above the waveforms relate to the vinyl control feature in
Mixxx and is hidden in the default
Mixxx user interface. Click the gear icon in the upper right corner, then toggle Skin Settings ‣ Vinyl Control Options, or use the specific Application shortcuts to show or hide the
section.
Veja também
Para mais informações em como usar o Controle por Vinil em sua configuração, vá para o capítulo Controle por Vinil.
Vinyl button
This button enables vinyl control. When enabled in Mixxx, the track
on the Mixxx deck is controlled by the external vinyl control.
Pass button
This button enables passthrough. When enabled, audio from an external vinyl
can be played on the Mixxx deck.
Botão Abs/Rel/Const
Modo absoluto: A posição da faixa é igual a posição e a velocidade da agulha.
Modo relativo: A velocidade da faixa é igual à da agulha, independente da posição.
Modo constante: A velocidade da faixa é igual à última velocidade conhecida, independente da agulha.
Cue/Hot button
Esse botão determina como os pontos cue são tratados no modo de controle por vinil relativo:
Desligado: Pontos cue são ignorados.
Cue: If the needle is dropped after the cue point, the track will seek
to that cue point.
Hot: The track will seek to the nearest previous hotcue point.
Os controles de taxa permitem que você mude a taxa com que as faixas são tocadas. Isso é muito útil para fazer beatmatching que põe as duas faixas juntas em uma só mixagem. Você pode fazer mudanças na taxa também do seu teclado de computador, veja o capítulo Usando um Teclado para mais informação.
Botão SINCRONIZAR
Clique com o lado esquerdo: Muda a taxa da faixa para que o BPM e a fase da outra faixa se iguale com a do outro deck.
Clique com o lado direito: Apenas afeta a taxa da faixa para igualar com a do outro deck mas não ajusta a fase.
Decks e samplers agora escolhem o alvo de sincronização para sincronizar na hora. Decks não podem sincronizar com sampler e samplers só podem sincronizar com decks. O alvo de sincronização para samplers é:
The sync leader, identified by the lit sync-lock button and the crown symbol.
The first deck (in numerical order) that is playing a track with a detected
beatgrid, and has a rate different than zero.
The first deck (in numerical order) that has a track loaded with a detected
beatgrid, no matter if it is playing or stopped.
So basically, if you sync a sampler and both deck 1 and deck 2 are playing a
track with a beatgrid then deck 1 will win since numerically it is first. The
sync targets for decks are chosen with the new sync lock feature, see
Sync Lock for more information.
Deslizante de Pitch/Taxa
Esse deslizante permite que você mude a velocidade da música, por padrão até 10% do tempo original da faixa. A velocidade vai aumentar quando você mover o deslizante para cima, se opondo ao comportamento encontrado em toca-discos de DJ e CDJs. Clicar com o lado direito no deslizante vai resetar o tempo para o valor original.
Mostrador d Taxa de Pitch
A porcentagem de quanto a taxa da faixa está acelerada ou desacelerada está mostrada aqui. Se o deslizante de pitch/taxa está posicionado no centro, o mostrador da taxa de pitch vai estar em +0.0%, o que indica nenhuma mudança.
Dica
To make the rate and/or pitch automatically reset whenever a new
track is loaded go to Preferences ‣ Decks ‣
Speed (Tempo) and Key (Pitch) options ‣ Reset on track load.
Botões de Pitch/Rate Temporários (Nudge)
Pushing the diagonal arrow buttons is like nudging the metal edge of
a turntable, or the outer edge of a CD player. It will give the track a push
or pull forwards or backwards. If the buttons are released the previous tempo
is restored. The buttons can act as either a fixed pitch bend or a
ramping pitch bend.
Botões de Pitch/Taxa
Clicking the - button will set the pitch/rate lower while the + button will set the pitch/rate higher. This is like moving the pitch slider up or down by a fixed amount. Unlike using the temporary pitch/rate buttons, the change is permanent so these button s don’t need to be held down.
Veja também
To customize the amount by which the buttons alter the pitch of
the track, the slider range as well as the direction, go to
Preferences ‣ Interface ‣
Adjustment buttons ‣ Permanent / Temporary.
Dica
Se o tempo da faixa mudar, você vai perceber que o tom muda baseado no pitch usado (por exemplo, tocar em um pitch rápido dá um som de esquilo). Você pode ativar a funcionalidade de Trava de Tom para manter um tom constante.
In this section of the Mixxx interface you can control (beat-)loops and set the
loop points of a track.
You can also shift loops using the beatjump / loop move controls shown at the right side of the looping controls.
Beatloop size
The input box allows you to set the size of the loop in beats to set with the Beatloop button. Changing this resizes the loop if the loop already matches the size.
If a loop is set, a loop overlay will be drawn on the
waveforms.
Beatloop
Left-clicking the Beatloop button starts a loop over the set number of beats. If quantize is enabled, it snaps to the nearest beat. This works for manually placed loops as well as automatic loops set by
the beatlooping buttons. Depending on the current status of the loop, the
loop overlay on the waveforms changes color. Right-clicking the Beatloop button temporarily enables a rolling loop over the set number of beats. Playback will resume where the track would have been if it had not entered the loop.
Double loop
Clicking on the arrow pointing up will double the current loop’s
length up to 64 bars. The length of the loop overlay in the waveform will
increase accordingly.
Halve loop
Clicking on the arrow pointing down will halve the current loop’s
length down to 1/32 bars. The length of the loop overlay in the waveform will
decrease accordingly.
Loop-In
This button allows you to manually set the start point of a loop.
A loop-in marker is placed on the waveform indicating the position.
If clicked when a loop was already set, it moves the start point of a loop
to a new position.
Loop-Out
This button allows you to manually set the end point of a loop.
A loop-out marker is placed on the waveform indicating the position. If
clicked when a loop was already set, it moves the end point of a loop to a new
position.
Reloop
Left-clicking this button toggles the current loop on or off. If the loop is ahead of the current position, looping will start when the loop is reached. This works only if the Loop-in and Loop-Out marker are set.
Right-clicking this button enables the loop, jumps to Loop-in marker and stops playback.
Dica
If you are playing inside a loop and want to move the end point
beyond its current position in the track, click on the Beatloop button
first and when the play position reaches the desired position, click
on the Loop-Out button.
Veja também
Se o modo de Quantização estiver ativado, os loops vão sempre entrar na batida mais próxima. Isso é desativado por padrão, clique no Ligar/Desligar Modo de Quantização para ativá-lo.
Para pular entre diferentes partes da faixa, você pode usar esses botões numerados. Você também pode usar atalhos do teclado, vá para Usando um Teclado para mais informação.
Clicar em um botão numerado vai definir um hotcue na posição atual de reprodução na faixa. Um marcador com o número correspondente vai aparecer nas ondas e o botão vai acender para indicar que o hotcue foi definido.
Enquanto tocando: Clique em um botão de hotcue para que a faixa pule instantâneamente para o local do hotcue e continue tocando. Se você estiver tocando dentro de um loop e clicar em um hotcue que está fora do loop, então a faixa ainda vai pular instantâneamente para o hotcue mas o loop vai ser desativado.
Enquanto parado: Clique em um botão de hotcue para que a faixa pule instantâneamente para o hotcue e comece a tocar enquanto o botão for pressionado. Pressione o atalho de teclado Tocar enquanto o botão de hotcue for pressionado para continuar a reprodução, e então solte o botão de hotcue.
It’s possible to add labels or colors to your hotcues to make them easier to
distinguish and make it possible to get their «meaning» at first glance.
Labels and colors can be assigned from the Hotcue context menu, which can be
opened by right-clicking either the hotcue button or the hotcue marker in the
waveform overview.
To delete a hotcue, right-click on the hotcue button or the waveform marker in
the overview waveform to open the context menu, then click the trash icon.
Nota
O Mixxx suporta até 36 hotcues por deck. Por padrão, apenas alguns deles são visíveis na interface do usuário. Você pode personalizar o seu mapeamento de teclado ou controlador para usar todos.
Veja também
Como os loops (veja acima), se o modo de quantização estiver ativado, os hotcues vão sempre entrar na batida mais próxima. Isso é desativado por padrão, clique no Ligar/Desligar Modo de Quantização para ativá-lo.
The left meter shows the volume level for the left deck,
while the right meter shows the volume level for the right deck.
The double meter at the center shows the current volume of the main output’s left and right channel separately.
These should stay at the top of the green region, with the loudest parts of the music
(transients) briefly going into the yellow region. They should never be in
the red region. Refer to
Setting your levels properly (gain staging)
for more details.
Deslizantes de linha
The two large faders on either side of the level meters are the deck volume
faders, also known as Channel- or Line-faders. Adjusting these controls the
volume of each deck.
Dica
Alguns DJs preferem usar os deslizantes de linha ao invés do crossfader para fazer transições entre faixas. Tente isso, você pode gostar.
The gain knob (orange) above the volume fader allows you to adjust the gain applied to the deck.
Use this to compensate for the differences in recording levels between tracks.
In general, you should adjust this knob so that the track’s level meter
stays around the top of the green region with the loudest parts of the track
(the transients) briefly going into the yellow region. Do NOT turn the
Gain Knob up so much that the level meter is in the red region. At this point
the track is clipping, which sounds bad and could damage equipment.
Nota
By default, Mixxx automatically applies an additional ReplayGain so
tracks have approximately equal loudness at unity gain. Your tracks
must be analyzed to take
advantage of this feature. When an unanalyzed track is
loaded, Mixxx calculates its ReplayGain value, but will not apply a
newly calculated ReplayGain value to a track after it has
already started playing (to avoid a sudden change in the gain of a
playing track).
The low, mid, and high EQ knobs allow you to change the filters of the audio.
This allows you to selectively reduce or boost certain frequency ranges of the audio.
As caixas pequenas ao lado de cada botão de EQ são chamadas de botões de matar. Segure esses botões para remover totalmente essa extensão de frequência. Clique rapidamente nos botões para manter. Quando ele estiver nesse modo mantendo, clique de novo para restaurar a extensão de frequência. Se os botões matar não funcionam como esperado, verifique as configurações da faixa de EQ nas preferências.
Quick Effect Super knob
This knob lets you control the Meta knob of the deck’s Quick Effect. “Filter” is the default.
Right-click this knob to center it. This is equivalent to “no audible effect” for the built-in
filter effects only (Filter, Moog Ladder 4 Filter).
The button next to the knob toggles the effect. It provides the same latching capabilities
like the EQ Kill switches.
Veja também
Você pode personalizar as configurações de EQ em Preferências ‣ Equalizador.
The headphone button is also known as the pre-fader listen or PFL
button and allows you to use headphone cueing. That is, it allows you to hear
the track you will play next in your headphones before your audience hears it.
This helps you plan when to start the next track and manipulate it to
make it blend better with the currently playing track (for example, by
synchronizing the beats, setting a loop, or using EQs). Pressing the PFL button
plays the track on the headphone output at full volume regardless of the
position of the crossfader or the deck’s line fader. To play a track in your
headphones but not have the audience hear it, press the PFL button and move the
crossfader all the way to the opposite side of the deck or turn the deck’s
volume fader all the way down.
Nota
Cueing no fone só é disponível se você configurou uma Saída de Fone em Preferências ‣ Hardware de Som.
Nota
If you use an external hardware mixer, plug your headphones into that
rather than your sound card. Use the headphone buttons on the mixer
rather than the buttons in Mixxx.
O crossfader determina o volume real de cada deck ao mover o deslizante da esquerda para a direita. Se ambos os decks estiverem tocando e o crossfader estiver na sua posição padrão central, então você vai ouvir ambas os decks. Clicar com o lado direito no crossfader vai resetar o deslizante para a sua posição padrão
To move the crossfader left or right, you can use the keyboard shortcutG and H.
To apply small crossfade left and small crossfade right, the shortcuts are Shift + G and Shift + H respectively.
Você pode inverter a configuração do crossfader, para que o deck da direita seja no final da esquerda do crossfader e vice-versa. Isso também é conhecido como Estilo Hamster. Para ajustar o crossfader para o seu estilo de mixagem, vá para Preferências ‣ Crossfader.
The crossfader orientation switches determine to which side of the crossfader the deck is assigned.
It can be set to the left or right side, or to the center where it is unaffected by the crossfader knob.
Dica
Usando a funcionalidade de AutoDJ do Mixxx, você pode automatizar a transição entre faixas.
Allows you to control how much of the Main output you hear in the
Headphones output. It works like a crossfader between the stereo
Main and stereo PFL signal. If the knob is set to the left, you
only hear the PFL signal, which is the usual position for prelistening tracks.
This can be used to practice DJing with only one stereo output and a set
of either speakers or headphones.
Additionally, this can be used to mix in headphones when you cannot hear the
speakers connected to the main output and there are no booth
monitor speakers. Some DJs prefer to use this knob to mix in headphones all
the time, but many find it to be a difficult way to play. If there is only one
set of speakers and no booth monitors, you can avoid the need to mix in
headphones by setting up the speakers behind you so both you and your
audience can hear them.
Nota
Não esqueça de ativar o botão PFL no deck que você quer escutar nos seus fones.
Head knob (Headphone gain)
This knob controls the gain applied to the headphone output signal that Mixxx
sends to your sound card. Generally, this knob should not be adjusted. To
adjust the volume in your headphones, adjust your sound card’s gain on the
headphone output. Most external sound cards have a gain knob specifically for
the headphone jack. If you use an onboard sound card for your headphones,
adjust the gain control in your OS mixer program.
If your sound card only has one gain knob that controls both the Main output
and the headphone output, then adjust the Head knob in Mixxx
to control the volume of your headphones without affecting your Main output.
Nota
Not all controls may be present in all skins anymore. However, these controls can be mapped to keyboards and MIDI controllers. See Mixxx Controls for detailed information.
Headphone Split Cue button
If activated, two mono signals are sent to the headphone output instead of one
stereo signal. The main signal plays in the right channel, while the cueing
signal plays in the left channel. You can still adjust the
Head Mix knob to control the mix of the Main and cue signals in
the left channel.
Botão de Balanceamento
This knob allows you to adjust the balance (left/right orientation) of
the Main output.
Main Knob
The Main Gain Knob controls the gain applied to the Main output signal that
Mixxx sends to your sound card, Internet broadcasting servers, and recorded
mixes. Generally, this knob should not be adjusted. To change the output
volume, a gain control should be adjusted as close to the speakers as possible
for the best signal-to-noise ratio throughout your signal chain. Ideally, the
volume would only be adjusted by adjusting the gain on the power amplifier.
On active speakers, including computer speakers, studio monitors, and PA
systems that do not require a separate amplifier, this means adjusting the
gain on the speakers (which may be labeled «Volume»).
As a DJ, you may not have access to the power amplifier. In that case,
adjust the volume by adjusting the gain on the equipment closest to the power
amplifier that you have access to. Typically, this is a DJ mixer. If you are
not going through a mixer, adjust the gain of your sound card. If your sound
card does not have any controls on it (for example, for sound cards built into
computers), adjust the sound card settings with your OS
mixer program. The Main Gain Knob in Mixxx should be a last resort for
adjusting volume.
Aviso
In no case should any part of the signal chain be clipping,
indicated by a level meter going into its red region
or an LED labeled «clipping» turning on.
Samplers são decks em miniatura. Eles permitem que você toque amostras curtas e jingles mas também faixas adicionais em sua mixagem. Eles vem com uma visão global das ondas e um número de controles limitados. Todos os controles funcionam como se eles fossem decks normais, veja Decks.
The Sampler section can be hidden in the
Mixxx user interface. Click the
SAMPLERS button at the top of the user interface, or use the specific
Application shortcuts to show or hide the section.
O mostrador de ondas mostra vários marcadores na faixa e também as ondas de toda a faixa. Clicar em algum lugar das ondas permite que você pule para uma posição arbitrária na faixa.
Marcadores nas Ondas
Enquanto mixando, alguns marcadores adicionais podem aparecer nas ondas:
Marcador de Posição: Uma linha vertical indica o ponto de reprodução do deck de samples.
Marcador Hotcue: Indica a posição e o número de um ponto hotcue se definido.
The buttons grid next to the waveform overview allow you to configure the
sampler deck. Starting from the top row (left to right) and the bottom row (left to right), the buttons are as
follows:
Ligar/Desligar o Modo de Repetição
Se ativado, o modo de repetição vai pular para o começo e continuar tocando quando a faixa terminar.
Botão Ejetar Faixa
Clicar nesse botão ejeta a faixa do deck
Ligar/Desligar Trava de Tom
A Trava de Tom trava o pitch da faixa fazendo com que ajustamentos no tempo usando o deslizante do pitch não afetem o pitch.
Crossfader Orientation Toggle
The crossfader orientation determines to which side of the crossfader the sampler is assigned.
It can be set to the left or right side, or to the center where it is unaffected by the crossfader knob.
O clique no botão começa sempre a reprodução do ponto cue. Se a reprodução já está ativada, a posição de reprodução vai pular de volta para o ponto cue. Um clique com o lado direito vai parar a reprodução e vai colocar a posição de reprodução no começo da sample.
Mixxx comes with some built in sound effects that can be chained together in
effect units. Effect units can be freely assigned to different decks as well
as other inputs. The buttons for routing decks to effect units are in the
Decks.
Veja também
The Efeitos chapter has a more detailed explanation of the
effects system.
The microphone section is hidden in the default Mixxx user interface. Click the MICS & AUX button at the top of your user interface, or use the specific Application shortcuts to
show or hide the section.
Veja também
The Using Microphones chapter has detailed instructions for
setting up microphones with various hardware.
Hold this button and talk to mix the microphone input into the Mixxx Main
output. Short click on the button for latching. This is handy for talking for
an extended period, for example when streaming a
radio show. When in Latch mode, click again to mute the microphone input.
Alternar Orientação da Mixagem
Esse controle determina a orientação da mixagem da entrada do microfone. Para o lado esquerda do crossfader, para o lado direito ou para o centro (padrão). Clicar alterna entre todas as opções.
Medidor do Volume do Microfone
Isso mostra o volume da potência do sinal de entrada do microfone.
Botão de Ganho do Microfone
Use este botão para ajustar o ganho da entrada do microfone. Tente manter o volume em um nível razoável para evitar clipagem.
The Preview Deck is a special deck that allows you to pre-listen to tracks in the
headphones before using them in your mix. Pre-listening to a track does not change
its Played state as well as the play counter and is not
logged in the History. Press CTRL + 4
(Windows/Linux) or CMD + 4 (Mac) to display the Preview Deck.
As funcionalidades em detalhe:
Track Artist/Title:
The artist and title of the track is displayed here. This is the same as that
listed under the Track and Title column heading in the Mixxx library. This information is initially loaded from the track’s metadata.
Eject Track button:
Clicking this button ejects the track from the deck.
Play/Pause button:
Clicking the button starts and pauses the playback. Right-clicking on the
button will stop playback and seek the play position to the beginning of the
tracks.
Visão geral das ondas: Mostra os vários marcadores (Cues, Hotcues) na faixa e tamabém o contorno das ondas de toda a faixa. Clicar em qualquer lugar das ondas permite que você pule para uma posição arbitrária na faixa.
Gain slider:
Move the slider to adjust the gain of the track.
Volume Meter:
Shows the current volume of the track. If it’s too loud and distorted, a
peak indicator flashes red.
