Vestax VCI-100 MKII
This controller has been discontinued as Vestax went out of business in 2014.
Nuevo en la versión 2.0.
Mapping Description
[Functions] in brackets are executed if a shift button of the deck is pressed. {Functions} in braces are executed if a shift button of the other deck is pressed. Changes after the previous version are in bold.
Unfocus EffectSlot of the EffectUnit [Select EffectUnit1/2]
Focus next EffectSlot of the EffectUnit [Select EffectUnit3/4]
Meta knob of the EffectSlot1, or if EffectSlotN is focused Parameter1 of it [Set the link to meta knob][1]
Meta knob of the EffectSlot2, or if EffectSlotN is focused Parameter2 of it [Set the link to meta knob]
Meta knob of the EffectSlot3, or if EffectSlotN is focused Parameter3 of it [Set the link to meta knob]
Super knob, or if EffectSlotN is focused Parameter4 of it [Set the link to meta knob], or if enabled by #33 Wet/dry mix of the EffectUnit
EQ high
EQ mid
EQ low
Pitch (up and down to 3 semitones continuously, or in keylock mode discretely)
Filter (super knob of Quick Effect)
Gain
Rate [Rate by quantized BPM]
Channel fader
Cross fader
Headphone volume
Headphone mix
Master volume
Scratch [Brake (if released before full stop, playback resumes)]
Jog (locked in slip mode)
Play [Reverse]
Cue [Cue and Play]
Activate [Clear] hotcue1
Activate [Clear] hotcue2
Sync mode [Adjust beatgrid to the current playposition]
Keylock mode [Quantize mode]
Loop by default loop size[2] [Reloop], or in loop Exit the loop [Set loop out position]
Halve default loop size [Jump backward], or in loop Halve the loop[Jump it backward] {Halve jump size[3] of the other deck}
Double default loop size [Jump forward], or in loop Double the loop[Jump it forward] {Double jump size of the other deck}
Enable [Set next effect to] EffectSlot1 of the EffectUnit
Enable [Set next effect to] EffectSlot2 of the EffectUnit
Enable [Set next effect to] EffectSlot3 of the EffectUnit
Enable #6 to control wet/dry mix of [Set next effect chain to] the EffectUnit
Slip mode (affect scratch, brake, pause, reverse, loop and hotcue)
PFL [PFL solo] (if headphone mix is cue or master only then switch it)
Enable EffectUnit1 [EffectUnit3] for the channel
Enable EffectUnit2 [EffectUnit4] for the channel
Up: previous item and scroll, Down: next item and scroll, Left: previous pane [load to left], Right: next pane [load to right], Push: choose item
Channel select
Mapping for Mixxx 2.0
[Functions] in brackets are executed if a shift button of the deck is pressed.
Set previous effect chain to the EffectUnit [Select EffectUnit1/2]
Set next effect chain to the EffectUnit [Select EffectUnit3/4]
Parameter1 of Effect1 of the EffectUnit
Parameter2 of Effect1 of the EffectUnit
Parameter3 of Effect1 of the EffectUnit
Wet/dry mix of the EffectUnit
EQ high
EQ mid
EQ low
Gain
Filter (high pass only)[4]
Pitch (semitones only)
Rate [Rate by quantized BPM]
Channel fader
Cross fader
Headphone volume
Headphone mix
Master volume
Scratch
Jog (locked in slip mode)
Play [Adjust beatgrid to the current playposition]
Cue [Adjust beatgrid to match another playing deck]
Cue and Play [Move beatgrid earlier]
Sync mode [Move beatgrid later]
Quantize mode [Zoom in waveform]
Keylock mode [Zoom out waveform]
Loop by default loop size[5] [Reloop], or in loop Exit the loop [Set loop out position]
Halve default loop size, or in loop Halve the loop [Move the loop backward by 1/2 beat]
Double default loop size, or in loop Double the loop [Move the loop forward by 1/2 beat]
Activate [Clear] hotcue1
Activate [Clear] hotcue2
Activate [Clear] hotcue3
Activate [Clear] hotcue4
Slip mode (affect scratch, loop and hotcue)
PFL [PFL solo] (if headphone mix is cue or master only then switch it)
Enable EffectUnit1 [EffectUnit3] for the channel
Enable EffectUnit2 [EffectUnit4] for the channel
Up: previous track and scroll, Down: next track and scroll, Left: load to left, Right: load to right, Push: load to first stopped
Channel select
left-right inverse -> right inverse -> left inverse -> full inverse -> none -> full -> left -> right -> left-right
size < 1/4: LED28 & 29; 1/4 ≤ size < 4: LED28; 4 < size ≤ 64: LED29; 64 < size: LED28 & 29
size < 1/4: LED28 & 29; 1/4 ≤ size < 4: LED28; 4 < size ≤ 64: LED29; 64 < size: LED28 & 29
see the article or use Controller Wizard (choose “Quick Effect Super Knob”) for low-high pass
size < 1/4: LED28 & 29; 1/4 ≤ size < 4: LED28; 4 < size ≤ 64: LED29; 64 < size: LED28 & 29